Edmonton Custom Cabinets brings 20+ years of cabinetry experience to kitchen cabinet refacing in Edmonton, Alberta. If the boxes are still sound, new doors, drawer fronts, and hardware can update an outdated kitchen without replacing the cabinets. We work with Shaker and flat-panel designs, wood veneers, laminate finishes, soft-close hinges, and new pulls, so the kitchen looks fresher with less disruption than a full replacement.
Aging kitchen finishes and hardware are a common reason to look at refacing instead of replacement. Proper measurements, durable materials, and compatible hardware are essential if the new doors and drawer fronts are going to fit the boxes you already have.
Get the numbers you need to plan with confidence—no pressure, just clear and honest pricing.

Classic Shaker cabinet doors use five-piece construction, with two vertical stiles, two horizontal rails, and a recessed centre panel. The style is a good fit when you want to replace outdated raised-panel doors without changing the existing kitchen layout. Door alignment matters as much as the look.
Alberta's 2015 Construction Performance Guide for new-home warranties uses 1/8 inch (3 mm) as a reference for how flush closed cabinet doors should sit against adjacent cabinetry. That is not a mandatory standard for kitchen refacing, but it is a useful illustration of why careful measurements, properly adjusted hinges, and consistent door alignment matter when new doors go on existing boxes.

Slim Shaker cabinet doors have narrower frames than a traditional Shaker design, which gives a cleaner, more modern look without replacing the boxes. They are especially useful in kitchens with smaller drawer fronts, narrow cabinets, or limited wall space. Many painted slim Shaker doors use medium-density fibreboard (MDF) for a smooth face and precisely routed edges.
According to Natural Resources Canada, MDF is manufactured in thicknesses ranging from ¼ inch to 1½ inches, although finished cabinet door thicknesses depend on the design. That range allows different recessed-panel profiles and frame proportions, so an older kitchen can get a more contemporary look while keeping the original boxes.

Modern flat-panel cabinet doors have smooth, uninterrupted surfaces without raised frames or decorative grooves, which suits a contemporary Edmonton kitchen. Slab doors are available in matte finishes, woodgrain laminates, and high-gloss surfaces, and can be made with MDF or particleboard cores, protective coatings, and sealed edges. Indoor air quality is one important consideration.
Under Canada's Formaldehyde Emissions from Composite Wood Products Regulations, MDF panels must meet a formaldehyde emission limit of 0.11 parts per million (ppm) under the specified primary testing method. Health Canada also recommends choosing pressed-wood cabinetry with laminate or protective coatings on all sides. Material certification, edge sealing, and precise door alignment are worth checking before you choose replacement slab doors.

Thermofoil and laminate cabinet refacing gives Edmonton kitchens smooth, easy-to-clean surfaces in matte, high-gloss, and woodgrain finishes. Thermofoil uses a vinyl film bonded to MDF, while laminate uses decorative sheets applied to a supporting panel.
Canada's Cabinetmaker Occupational Analysis identifies general-purpose (GP) and vertical-grade (V32) laminates, with the grade selected for the application. Adhesive selection, sealed edges, and heat protection around ovens and dishwashers matter if you want to avoid premature peeling or delamination.

Traditional raised-panel cabinet doors have a raised centre panel surrounded by decorative framing, which gives the kitchen a classic look. They are available in oak, maple, and other wood finishes, and they need attention to indoor humidity.
Solid wood expands and contracts as moisture levels change, which can cause cracks or separated joints. Health Canada recommends maintaining 30–50% indoor relative humidity, which is an important consideration when protecting wood cabinet doors.

Natural wood veneer cabinet refacing gives an Edmonton kitchen the look of oak, maple, or walnut without replacing the existing boxes. Thin layers of real hardwood are bonded to suitable surfaces to create a consistent woodgrain finish.
Canada's federal Cabinetmaker Occupational Analysis identifies three veneer-matching techniques: book, slip, and diamond matching. Those methods control the grain pattern across adjoining doors and panels, so the finished kitchen looks coordinated rather than mismatched.


Choosing the right cabinet materials involves more than colour. MDF, plywood, and particleboard offer different levels of durability, moisture resistance, and finishing options.
Under Canada's Formaldehyde Emissions Regulations, particleboard must meet a 0.09 parts per million (ppm) emission limit. Health Canada also recommends sealing pressed-wood cabinetry on all sides to help reduce formaldehyde exposure. Finishes, sealed edges, and low-emission adhesives are worth checking when you reface existing kitchens.

Cabinet refacing can modernize an older Edmonton kitchen without changing the existing layout. Replacing worn doors, drawer fronts, and hardware can give structurally sound cabinets a fresh appearance and reduce unnecessary demolition.

Cabinet refacing lets you update the kitchen without tearing out boxes that are still doing their job. Less demolition means less waste and less disruption at home. The Government of Alberta's Waste Reduction Strategy identifies five waste-management priorities — reduce, reuse, recycle, recover, and dispose — with waste reduction preferred. Keeping structurally sound cabinetry in place supports that approach.

Cabinet refacing can give an Edmonton kitchen a new look without the cost of replacing every cabinet. Canadian refacing projects typically range from $5,000 to $12,000, with a published Alberta average of $10,074. Those figures are sourced ranges already published on the source site, not a substitute for a measured quote. Costs depend on kitchen size, door materials, hardware, and installation. Keeping the existing boxes can reduce expenses, and the Government of Alberta recommends written estimates with itemized costs.
Less Demolition, Less Waste
Cabinet refacing updates the kitchen without removing cabinet boxes that are still structurally sound. That means less demolition, fewer materials sent for disposal, and less disruption at home than a full cabinet replacement.
The Government of Alberta's Waste Reduction Strategy lists five priorities — reduce, reuse, recycle, recover, and dispose — and treats waste reduction as the preferred option. Leaving sound cabinetry in place is one practical way to follow that approach.
More Control Over Your Renovation Budget
If the boxes are still doing their job, you can put more of the budget into new doors, drawer fronts, and hardware instead of replacing the entire cabinet run.
Before paying a deposit, there is another detail worth checking. Under Alberta's prepaid contracting rules, certain renovation contractors must hold a provincial licence, and qualifying contracts come with a 10-day cancellation period after you receive a copy. That is useful protection when you are committing money to a kitchen upgrade.
A Fresh Kitchen Without Changing the Layout
If the kitchen layout already works, cabinet refacing can leave the existing countertops, plumbing, and appliance locations in place while updating the doors and finishes.
According to Canada Mortgage and Housing Corporation, adaptable kitchen design guidelines recommend 1,200 mm (48 inches) of clearance in parallel kitchens and 1,500 mm (60 inches) in U-shaped kitchens. These are planning guidelines, not mandatory renovation requirements. If the current layout already works, refacing lets you update what you see and use every day.
Cabinet refacing in Edmonton is usually priced against Canadian refacing projects, which typically range from $5,000 to $12,000, with a published Alberta average of $10,074. Those figures are published market ranges, not a substitute for a measured quote from Edmonton Custom Cabinets. Costs depend on kitchen size, door materials, hardware, and installation. Keeping existing countertops and plumbing locations can help control extra renovation expenses, and we confirm your Edmonton estimate after measuring the kitchen.
Your kitchen is a good candidate for cabinet refacing in Edmonton if the existing boxes are structurally sound, securely mounted, and free from moisture damage. Check for swollen particleboard, loose joints, and sagging shelves before you start. Canada's Cabinetmaker Occupational Analysis highlights three installation checks: level floors, plumb walls, and square corners. Many older Edmonton kitchens may be candidates if the boxes have held up.
Yes, cabinet refacing in Edmonton can keep your existing countertops and layout. It updates doors, drawer fronts, and hardware while leaving the cabinet boxes, countertops, plumbing, and appliance locations in place, which is one reason it usually involves less demolition than a full kitchen replacement. Canada Mortgage and Housing Corporation planning guidelines mention 1,200 mm (48 inches) of clearance in parallel kitchens and 1,500 mm (60 inches) in U-shaped kitchens; those are planning guidelines, not mandatory renovation rules. If your current layout already works, refacing lets you change what you see and use every day without tearing the kitchen apart.
Cabinet refacing in Edmonton generally falls under minor cosmetic work that does not need a permit. The City of Edmonton says permits are not required for maintenance or minor cosmetic upgrades such as installing kitchen cabinets or painting. The City does not list cabinet refacing by name, but replacing doors, drawer fronts, and hardware without changing plumbing, electrical, or walls is a similar kind of update. A building permit may be required if you alter walls or the structure, and separate trade permits are required for plumbing, gas, or electrical work.
Cabinet refacing in Edmonton replaces the doors, drawer fronts, and usually the hardware, while cabinet painting and refinishing coats the doors and frames you already have. Refacing can include a new veneer or finish on the visible frames while keeping the existing boxes. If the boxes are solid but the doors are damaged, warped, or the wrong style, refacing is often the better path. If the doors are in good shape and you mainly want a new colour or a restored wood finish, painting or refinishing may be enough.
Door styles for cabinet refacing in Edmonton include classic Shaker doors, slimmer Shaker frames, modern flat-panel or slab doors, thermofoil and laminate finishes, traditional raised-panel wood doors, and natural wood veneer in oak, maple, or walnut. Many painted slim Shaker doors use MDF for a smooth face. Soft-close hinges and updated pulls can be added at the same time. We also pay attention to edge sealing and, for composite wood products, Canada's formaldehyde emission limits, including 0.11 ppm for standard MDF and 0.09 ppm for particleboard. The right style depends on the existing boxes and the look you want in the kitchen.